GB.13-V2
tu
↵
RESULT? NO
CHARGING SYSTEM LOW WHEN TEST WITH
ACCESSORY LOADS
The
alternator
is
not
providing sufficient current
for the system’s electrical
loads and the charging current for the battery. Check the
belts to ensure the alternator is rotating with the engine
running. If the belts are slipping or broken, replace the
belts and retest. Check the connections from the
alternator to the battery. If the connection is loose or
heavily corroded, clean or replace the cable and retest.
If the belts and connections are in good working
condition, replace the alternator.
CHARGING SYSTEM NORMAL WHEN TEST WITH
ACCESSORY LOADS
The system is showing
normal output from the
alternator.
No
problem
detected.
11.
Press
«ENTER»
when
charging system test is
completed finish. Turn all
accessory
loads
and
engine off. Press «ENTER» to return to step 1 or
remove the test clamps from the battery posts after
completion of testing to end test.
12.
Press the
tu
key to select
result printing: YES or NO.
Press «ENTER» to confirm
your choice.
ALT. LOAD VOLTS
××.××V LOW
ALT. LOAD VOLTS
××.××V NORMAL
TEST OVER. TURN
OFF LOADS & ENGINE
