GB.8-V2
RECHARGE.& RETEST
××.××V ×××× SAE
BAD & REPLACE
××.××V ×××× SAE
BAD CELL & REPLACE
××.××V ×××× SAE
LOAD ERROR
WAITING FOR
STABILIZATION
RECHARGE & RETEST:
The battery is discharged.
The battery condition
cannot be determined until
it is fully charged.
Recharge & retest the battery.
BAD & REPLACE:
The battery will not hold a
charge. It should be
replaced immediately.
BAD CELL & REPLACE:
The battery has at least
one cell in short circuit. It
should be replaced
immediately.
LOAD ERROR:
The tested battery is bigger
than 2000CCA or 200AH,
or the clamps are not
connected properly. Please fully charge the battery
and retest after excluding both previous reasons. If
reading is the same, the battery should be replaced
immediately.
WAITING FOR
STABILIZATION:
For unstable batteries, with
enough electrical activity
potentially affecting the test results (weak battery and/or
recently used batteries), please wait a few minutes for
battery to re-stabilize. Alternatively fully charge the
battery then retest.