GB.9-V2
tu
↵
RESULT? NO
SYSTEM TEST
tu
↵
××.××V
13.
Press
tu
to
select
whether to print the result
or not, then press ENTER
to confirm your choice.
24V System Test Printing: The printer will not
function for 24 Volt batteries system test printing.
The 24V system test result will be recorded till you
hook up to a 12V battery and the right screen shows
up. Please select “YES” and press enter key to print
the result and then disconnect the clamps. The
screen will appear again after you reconnect the
clamps. Please select “NO” and press the enter key
to go back to the main menu..
14.
Press <ENTER> to return to step 5 or remove the test
clamps from the battery posts after completion of the
battery test.
SYSTEM TEST
Example:
1.
Select “System Test” and
press «ENTER» button to
analyze
a
vehicle’s
charging / starting system.
2.
Turn off all vehicle accessory loads such as light, air
conditioning, radio, etc.
before starting the engine.
3.
When the engine is started,
one of the three results will
be displayed along with the actual measured reading.
CRANKING VOLTS
NORMAL
The system is showing
normal
draw.
Press
TURN OFF LOADS
START ENGINE
CRANKING VOLTS
××.××V NORMAL
