BayTech Telplex TX102, Owner'S Manual

Page: 56 / 99

50
50
Current Unit Number is: 1
+-------+------------------------------------------+----------+
| String| Programmable String | Send On |
+-------+------------------------------------------+----------+
| 1 | | Manual |
+-------+------------------------------------------+----------+
| 2 | | Manual |
+-------+------------------------------------------+----------+
Press any Key to continue
NOTE: The "Remote Destination" and "Current Unit Number" menus
shown above and on the previous page will not appear for a standard
unit.
The Telplex will then return to the respective main configuration menu.
You may now make whatever changes are necessary. Typing "X" will
return you to the System menu or the Local Mode menu.
5.3 5.3 SERIAL PORT CONFIGURATION SERIAL PORT CONFIGURATION
By responding to the Enter Request: message at the end of the main
configuration menu (see Section 5.1.1 ) for either type of unit with "2"
(Serial Port Configuration), you may review the current serial port status
of all terminal ports and make any necessary changes. Serial port
configuration for the composite port is described in
Section 5.8 .
Programmable serial parameters for the terminal ports include baud
rate, word size, stop bits, parity, XON/XOFF handshaking in the transmit
data (Xmit) and receive data (Recv) directions, and RTS/DSR pass
through. The Telplex will respond with:
+------+------+------+------+------+------+------+-------+
| Port | Baud | Word | Stop |Parity| Xon / Xoff | PASS |
| | Rate | Size | Bits | | Xmit | Recv |RTS-DSR|
+------+------+------+------+------+------+------+-------+
| 1 | 9600| 8 | 1 | NONE | OFF | OFF | NO |
| 2 | 9600| 8 | 1 | NONE | OFF | OFF | NO |
| 3 | 9600| 8 | 1 | NONE | OFF | OFF | NO |
| 4 | 9600| 8 | 1 | NONE | OFF | OFF | NO |
+------+------+------+------+------+------+------+-------+
Enter Port Number 1-4 or X to Exit :