48
48
5.2
5.2
STATUS
STATUS
By responding to the
Enter Request:
message at the end of the main
configuration menu (see
Section 5.1.1
or
Section 5.1.2
) for either type of
unit with "1" (Status), you may review the current status of the Telplex and
make any necessary changes. The Telplex will respond with:
+------+------+------+------+------+------+------+-------+
| Port | Baud | Word | Stop |Parity| Xon / Xoff | PASS |
| | Rate | Size | Bits | | Xmit | Recv |RTS-DSR|
+------+------+------+------+------+------+------+-------+
| 1 | 9600| 8 | 1 | NONE | OFF | OFF | NO |
| 2 | 9600| 8 | 1 | NONE | OFF | OFF | NO |
| 3 | 9600| 8 | 1 | NONE | OFF | OFF | NO |
| 4 | 9600| 8 | 1 | NONE | OFF | OFF | NO |
+------+------+------+------+------+------+------+-------+
Press any Key to continue
+------+------+------+------+------+--------+
| Port | Baud | Word | Stop |Parity| Line |
| | Rate | Size | Bits | | Type |
+------+------+------+------+------+--------+
| 5 | 9600 | 8 | 1 | None | Direct |
+------+------+------+------+------+--------+
Press any Key to continue
+------+------+------+------------+
| Port | Block |Local | Status |
| | Size |Access| Messages |
+------+------+------+------------+
| 1 | 032 | YES | ON |
| 2 | 032 | NO | OFF |
| 3 | 032 | NO | OFF |
| 4 | 032 | NO | OFF |
+------+------+------+------------+
Press any Key to continue
+------+--------------------+
| Port | Remote Destination |
| | Unit /Module/ Port |
+------+------+------+------+
| 1 | 1 | 1 | 1 |
| 2 | 1 | 1 | 2 |
| 3 | 1 | 1 | 3 |
| 4 | 1 | 1 | 4 |
Summary of Contents for Telplex TX102
