manualshive.com logo in svg

BayTech Telplex TX102, Owner'S Manual

Share
Download
BayTech Telplex TX102 Owner'S Manual Download Page 11

5

5

2

2

 

SPECIFICATIONS

SPECIFICATIONS

INTERFACE:

  Terminal Ports and Composite Port (Modem

Connection):  EIA-232 (CCITT V.24) -12V mark, +12V
space.
Composite Port (Direct Connection)*:  EIA-422.

TRANSMISSION:

  Asynchronous.

CONNECTORS:

  TX104/TX108 Terminal Ports:

DB-25 female, DCE type;
Composite Port:  DB-25 male, DTE type.
TX102 (all ports):  RJ-45.

HANDSHAKING:

  Terminal Ports:  Input - DTR, RTS;

Output - CTS, DSR.  Selectable XON/XOFF;
Composite Port:  Input - CTS, Output - internal protocol.

INTERNAL BUFFER:

  Receive - 256 character; Transmit -

7.5K per port.

POWER:

  TX104 and TX108:  115 VAC, 50/60 Hz., 0.2A;

Optional 230 VAC, 50/60 Hz, 0.1A.
TX102:  +8 VDC, 200 mA external power required
(supplied with unit).

ENVIRONMENT:

  0 degrees to 50 degrees C temperature;

5% to 95% humidity.

DIMENSIONS:

  TX104 and TX108 - 10.125w x 6.5d x 2.25h

inches; TX102 - 4.17w x 4.705d x 1.5h inches.

WEIGHT:

  4 lbs..

* - The composite port of the TX102 uses EIA-232 serial interface
for Direct Connection.

Summary of Contents for Telplex TX102




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands