8
OPTIONAL POWER DROP SETUP
The Trolls game is pre-wired, ready to accept incoming AC voltage from the top
of the game from a location’s drop cord.
However, there is some modification to the game that must be done.
Remove 4 screws from the top
half dome of game using a
Phillips screwdriver.
Remove the black filler plug.
Remove 4 screws from the
LED light board using a #2
square bit drive.
Pull the black power cord
up through the hole.
Reinstall the LED light
board using a #2 square
bit drive. The power cord
will extend out from under
this board.
Place the half dome back onto game,
making sure to pull power cord out the
hole in the top of the half dome.
Open the pink station’s main door and unplug
the existing AC power cord from the line filter.
Plug in the spare secondary AC power cord that
is coming from the top of the cabinet.
