31
HOW TO CHANGE TURNTABLE MOTOR
The turntable motor should be replaced by removing the round mirror glass
table.
The blue and pink pusher arms must be removed from the mounts and
allow to dangle out of the way - off the mirror.
Do this by removing the 2 screws in each arm using a
Phillips screwdriver.
Remove 3 of the white metal prize guides from the blue, pink, and
Orange sides by removing the Phillips screws.
Remove the mirror glass turntable carefully from cabinet and place aside in
a safe location.
Remove the 4 screws in the motor bracket using a Phillips screwdriver.
Lift bracket with motor attached from cabinet.
The motor can now be unscrewed and
replaced.
Re-install in cabinet making sure the shaft of the motor is in the center of
the greased lazy susan.
Place the mirror glass turntable back in cabinet - make sure the pin locks in
the retaining socket on the bottom of the mirror. It will fall into place as you
turn the mirror.
Reattach the pusher arms. Make sure to push the LED light strip inside the
white plastic as you align the pusher arm on the support bracket.
Reattach the white metal guides.
