manualshive.com logo in svg

Bay Networks Centillion 5000 5000BH, Using Manual, Page: 7 / 70

Share
Download
Bay Networks Centillion 5000 5000BH Using Manual Download Page 7

 

893-01019-A

 

vii

 

Contents

 

 Preface

 

Purpose  ...........................................................................................................................xiii

Audience ..........................................................................................................................xiii

Conventions .....................................................................................................................xiv

Special Message Formats .........................................................................................xiv

Two-tiered Procedure Format ....................................................................................xiv

Related Publications  ........................................................................................................ xv

Ordering Bay Networks Publications  ............................................................................... xv

Bay Networks Customer Support  ....................................................................................xvi

How to Get Help  ..............................................................................................................xvi

For More Information  ......................................................................................................xvii

 

Chapter 1 
Overview of the TokenSpeed Module

 

About the TokenSpeed Module .......................................................................................1-1

Features  .........................................................................................................................1-2

TokenSpeed Module Ports and Connectivity  ...........................................................1-2

Filtering  ....................................................................................................................1-3

Caching and Proxy ...................................................................................................1-3

Fault Tolerance  .........................................................................................................1-3

Network Management  ..............................................................................................1-3

Physical Description  .......................................................................................................1-4

 

Chapter 2 
TokenSpeed Module Applications

 

Giving a Server a Dedicated Port  ...................................................................................2-1

Segmenting a Ring  .........................................................................................................2-2

Connecting a Segment Through the RI or RO Port ..................................................2-3

Connecting a Segment Using a Lobe Port ...............................................................2-4

Replacing a Source Route Bridge or Router  ..................................................................2-5

Concentrating Rings into a Router  .................................................................................2-5

 

TKNSPD.BK  Page vii  Thursday, July 17, 1997  11:43 AM

Summary of Contents for Centillion 5000 5000BH







































































Reviews:

No comments