manualshive.com logo in svg

Bay Networks Centillion 5000 5000BH, Using Manual, Page: 47 / 70

Share
Download
Bay Networks Centillion 5000 5000BH Using Manual Download Page 47

Troubleshooting the TokenSpeed Module

893-01019-A

4-3

 

9.

Click on the Start button in the Software Download dialog box.

If the display returns to the Main Menu instead of displaying the “Writing to 
Flash” message, the download process did not complete successfully. 

10.

If you are not prompted to reset the switch, choose Discover again.

11.

Click on the icon for the switch and choose Download software.

When the download is complete, the following message is displayed:

Writing to Flash...

The switch begins executing the loaded switch image and prompts you to 
reset the switch.

12.

Choose Reset to verify that the downloaded image is installed properly.

When the switch completes the reset and starts operating properly, you may 
continue normal operation. If the reset is unsuccessful or an error indication 
appears, repeat the entire procedure. If it fails again, call Bay Networks customer 
support. Please be ready to provide the service representative with the information 
listed on 

page 4-1

.

TokenSpeed Module Startup Failure

Symptom: The switch startup process completes successfully, but the Activity 
LED blinks continually.

To resolve the problem, follow these steps:

1.

Check all modules in the chassis to make sure they are firmly seated and 
that the retaining screws are tight.

2.

Remove and reinsert the failing module.

If the problem persists, contact Bay Networks customer support. Please be ready 
to provide the service representative with the information listed on 

page 4-1

.

TKNSPD.BK  Page 3  Thursday, July 17, 1997  11:43 AM

Summary of Contents for Centillion 5000 5000BH







































































Reviews:

No comments