manualshive.com logo in svg

Bay Networks Centillion 5000 5000BH, Using Manual, Page: 21 / 70

Share
Download
Bay Networks Centillion 5000 5000BH Using Manual Download Page 21

 

Overview of the TokenSpeed Module

 

893-01019-A

 

1-3

 

 

Filtering

 

The TokenSpeed module has the following filtering features:

•

Support for NetBIOS name filters, datagram broadcast filters, and a name 
query interval

•

Filtering for any pattern up to 12 bytes wide in the first 255 bytes of a frame

•

Per-port filter configuration

 

Caching and Proxy

 

The TokenSpeed module has the following caching and proxy features:

•

Caching for NetBIOS names to reduce NetBIOS name broadcast packets 
(Each switch can cache up to 500 NetBIOS names.)

•

Caching for Route Information Field (RIF) to speed up the explorer process 
and reduce broadcasts (Each switch can cache up to 500 unique RIFs.)

•

Cache capacity of up to 128 RIFs for source route explorer proxy and 
5120 media access control (MAC) addresses

•

Cache capacity of up to 10,240 MAC addresses in the MCP station table

 

Fault Tolerance

 

The TokenSpeed module has the following fault-tolerance features:

•

Ability to install, remove, and replace a module in an operational chassis 
(hot-swap)

•

Flash memory download with storage for two configurations on the 
TokenSpeed/MCP module

•

Software update and management access over the network or a serial 
connection to the TokenSpeed/MCP module

 

Network Management

 

The TokenSpeed/MCP module provides the following network management 
features for the TokenSpeed module and other modules in a Centillion switch:

•

Simple Network Management Protocol (SNMP) agent with Centillion 
Management Information Base (MIB) extensions

 

TKNSPD.BK  Page 3  Thursday, July 17, 1997  11:43 AM

Summary of Contents for Centillion 5000 5000BH







































































Reviews:

No comments