manualshive.com logo in svg

Bay Networks Centillion 5000 5000BH, Using Manual, Page: 35 / 70

Share
Download
Bay Networks Centillion 5000 5000BH Using Manual Download Page 35

Installing and Connecting the TokenSpeed Module

893-01019-A

3-7

 

Management Connection

A serial connection for a SpeedView network management station is provided on 
the TokenSpeed/MCP module. The cable for this connection is shipped with the 
Centillion switch. Attach the serial MCP cable to the Mini DIN 8 port on the 
TokenSpeed/MCP module (see 

Figure 3-7

).

Figure 3-7.

Connecting the serial MCP cable to the TokenSpeed/MCP

Attach the other side of the MCP cable to the serial port of your management 
station, either directly or through the DB-25 to DB-9 adapter that is also shipped 
with the switch.

Verifying the Installation

When the TokenSpeed module is installed and the cables are connected to the 
ports, the module is ready for operation. All connected ports are enabled, unless 
they have been disabled by SpeedView. Enabling and disabling TokenSpeed 
module ports is described in Using SpeedView 2.1 for Windows.

You can verify the installation of a TokenSpeed module by looking at the LEDs 
on the module while the module is operating and during the system startup 
sequence. This section describes the TokenSpeed module LEDs and the LED 
sequence that occurs when the module starts.

MCP

6468

TKNSPD.BK  Page 7  Thursday, July 17, 1997  11:43 AM

Summary of Contents for Centillion 5000 5000BH







































































Reviews:

No comments