manualshive.com logo in svg

Bay Networks Centillion 5000 5000BH, Using Manual, Page: 22 / 70

Share
Download
Bay Networks Centillion 5000 5000BH Using Manual Download Page 22

 

Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules

1-4

 

893-01019-A

 

•

Bootstrap Protocol (BootP) and Trivial File Transfer Protocol (TFTP) support

•

SpeedView

 

™

 

 application for configuration management and monitoring, 

available for Windows environments over RS-232 and SNMP

For additional information about SpeedView, refer to 

 

Using SpeedView 2.1 for 

Windows

 

.

 

Physical Description

 

The TokenSpeed module (see 

Figure 1-1

) is an assembly that consists of a printed 

circuit board with a metal module faceplate. The module has inserter/extractor 
levers and captive retaining screws on each side of the front panel. The module 
occupies a single slot in the Centillion switch chassis.

 

Figure 1-1.

Hardware features of the TokenSpeed module

 

The module front panel contains eight RJ-45 connectors for the token ring ports 
and an array of port LEDs that indicate ring insertion and port activity. The 
TokenSpeed/MCP module also has a Mini DIN 8 connector for the serial MCP 
port. 

For descriptions of the LEDs, see 

“TokenSpeed Module LEDs

” on 

page 3-8

. 

For cable and connector specifications, see 

Appendix B, “Cables

.”

Inserter/extractor

levers

Captive retaining

screws

LEDs

Backplane connector

Power supply
connector

Printed circuit
board

MCP serial port (optional)

8 ports (RJ-45)

980FA

 

TKNSPD.BK  Page 4  Thursday, July 17, 1997  11:43 AM

Summary of Contents for Centillion 5000 5000BH







































































Reviews:

No comments