baxter HomeChoice, Manual, Page: 92 / 377

07-19-61-244 October 2, 2009 HomeChoice APD Systems Patient At-Home Guide
8-17
8. Operating Instructions – PRO Card and Modem
8.5 If You Require a New System or “Swap”
If your HomeChoice PRO APD System must be returned (or swapped) for service,
remove the PRO Card from the old cycler. Insert the PRO Card into the new cycler
and turn on the power.
When the display prompts you to CONFIRM CARD, follow the procedures in
8.2.2, Confirm Your PRO Card , on page 8-4 and 8.2.3, Confirm a New Therapy , on
page 8-5. When the card is confirmed, the new system is updated to match the
therapy settings on your old system, including any manual changes you made.
5. Hang up the telephone, if necessary, and allow the
dialysis center to call back with their modem.
The
HomeChoice PRO APD System automatically
answers.
An error message, MODEM ERROR n appears if a
problem occurs. Call Baxter Technical Service and
report the Modem Error number. See 2.2, Numbers
to Call for Assistance , on page 2-1.
If an urgent need occurs to use the phone during
the transfer, press
STOP
. The transfer stops
immediately and the telephone can be used.
6. When the transfer is complete, your telephone is
available for use. You do not need to unplug the
phone line.
h
NOTE:
If you used a modem with your old system, detach the cable from your
old system and plug it into the new system. See 8.4, Install the Modem
Option , on page 8-14 for instructions.
Steps to test your
modem connection
(Continued) Display screen
TRANSFERRING...
MODEM ERROR n
PRESS GO TO START