baxter HomeChoice, Manual, Page: 162 / 377

07-19-61-244 October 2, 2009 HomeChoice APD Systems Patient At-Home Guide
10-5
10. Operating Instructions – Make Adjustments
10.2.3 Auto Dim
If AUTO DIM is set to YES, the display screen turns off during your therapy if no
buttons are pressed for five (5) minutes. A single dot will move from left to right
across the screen. The display screen will turn back on if an alarm occurs or if a
button is pressed.
The default setting is AUTO DIM: NO.
Follow the steps below to change the Auto Dim option.
h
NOTE:
AUTO DIM will not operate when the display screen is showing the
current time or estimated treatment end time.
Steps to set Auto Dim Display screen
1. Press
ENTER
to access the MAKE ADJUSTMENTS
menu.
2. Press
V
until AUTO DIM appears.
3. Press
ENTER
.
The YES or NO blinks.
(YES or NO blinks)
4. Press
U
or
V
to change the setting.
5. Press
ENTER
to save the new setting.
The blinking stops.
(Blinking stops)
6. Press
V
to display the next option.
– OR –
7. If you do not want to make any other adjustments,
press
STOP
to exit Make Adjustments.
MAKE ADJUSTMENTS
AUTO DIM: NO
AUTO DIM: NO
AUTO DIM: YES
AUTO DIM: YES
SET CLOCK: 7:10 AM
PRESS GO TO START