baxter HomeChoice, Manual, Page: 247 / 377

07-19-61-244 October 2, 2009 HomeChoice APD Systems Patient At-Home Guide
15-3
15. Cleaning
15.3 Preparing the Cycler for Return to Baxter
Before you return the HomeChoice APD System cycler to Baxter, follow the steps
below:
If you have any questions or have difficulty with this procedure, contact Baxter
Technical Assistance at the number listed in 2.2, Numbers to Call for Assistance , on
page 2-1.
IMPORTANT
Return this cycler to your dialysis center or to Baxter by
calling Baxter Technical Assistance.
Steps to prepare the cycler for return
1. Put on protective rubber gloves and an apron.
2. Mix a sanitizing solution of 1 gallon (3.8 liters) water and 16 oz or 2 cups
(0.5 liter) household bleach.
3. Wipe all outer surfaces of the cycler with a sponge dampened with the
sanitizing solution.
Be careful not to apply too much solution.
4. Use a clean cloth or paper towels to wipe any excess moisture from the
surface.