BURNER AND INJECTORS
Remove the glass frame assembly
and coalbed.
Release the compression nuts that
connect the gas feed pipes to the
injectors on the burner.
The coalbed location pins also secure the burner in
position. Unscrew and remove the pins.
Manoeuvre the burner clear of the fire, taking care not
to damage the pilot assembly.
The injectors can now be removed from the
burner.
Assemble the combination of new or old, burner
and injectors, that are to be replaced.
NOTE:- The larger injector should be fitted into the
front burner inlet position.
Replace the burner in the reverse order of removal.
Replace the coalbed and glass frame assembly.
Glass Frame
26