Page 5
User Manual
DTL-960e Single Colour Channel Digital Video Recorder
DAMAGE REQUIRING SERVICE
Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions:
When the power-supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into the unit.
If the unit has been exposed to rain or water.
If the unit does not operate normally by following the operating instructions.
If the unit has been dropped or the cabinet has been damaged.
When the unit exhibits a distinct change in performance.
If the unit has no power even when the power supply appears to operate correctly. If this is the case then ask a
service engineer to test the internal fuse.
ELECTROMAGNETIC COMPATIBILITY (EMC)
This is a Class A product. In a domestic environment this product may cause radio interference, in which case, the user
may be required to take adequate measures.
MANUFACTURERS DECLARATION OF CONFORMANCE
A Declaration of Conformity in accordance with the above EU standards has been made and is on file at Baxall Limited,
Stockport, SK6 2SU, England.
The manufacturer declares that the product supplied with this document is compliant with the provisions of the EMC
Directive 89/336 EEC, the Low Voltage Directive LVD 73/23 EEC, the CE Marking Directive 93/68 EEC and all associated
amendments.
The product is also Y2K compliant in accordance with British Standards Institution, DISC PD2000-1.
UNPACKING
Check the package and contents for visible damage. The packaging should contain:
The Baxall DTL-960e unit.
Accessories PCB.
A 12-volt power supply with power cable.
The DTL-960e user manual.
WaveReader software with instruction manual.
If any components are missing or damaged, contact the supplier immediately.
Do not attempt to use the unit.
If, for any
reason they must be returned, the contents must be shipped in the original packaging.
INSTALLATION ENVIRONMENT
Power:
Ensure that the sites AC power is stable and within the rated voltage of the external power supply. If the sites AC power
is likely to have spikes or power dips, use power line conditioning or an Uninterruptable Power Supply (UPS).
Ventilation:
Install the unit in a well-ventilated area. Take note of the locations of the cooling vents in the units enclosure, and ensure
that they are not obstructed.
Temperature:
Observe the units ambient temperature specifications when choosing a location space. Extremes of heat or cold beyond
the specified operating temperature limits may cause the unit to fail. Do not install the unit on top of other hot equipment.
Moisture:
Do not expose the unit to rain or moisture. Moisture can damage the internal components. Do not install this unit near
sources of water.
Chassis:
You can place other equipment on top of the unit if it weighs less than 35 pounds.
All manuals and user guides at all-guides.com
