Page 31
User Manual
DTL-960e Single Colour Channel Digital Video Recorder
AUTO DELETE MODE
By selecting this menu item, the Auto Delete function can be turned on and off. Configuring
the unit with the Auto Delete mode
ON
prevents the unit from displaying or archiving any
data that is more than 30 days old. This feature may be required by law under the Data
Protection Act.
Use the Jog to select
ON
of
OFF
. To confirm the selection and exit the menu, press the
Enter
button. To exit the menu without making changes, press the
Menu
button.
COMMUNICATIONS (INCLUDING ETHERNET SETTINGS)
When the
Communications
menu item is selected, a sub-menu is displayed. Use this
sub-menu to specify:
The data transfer rate for the RS-232 serial port.
The Ethernet network connection settings for the DTL-960e.
Baud Rate
Use the
Jog
to select the required Baud Rate.
To confirm the selection and exit the menu, press the
Enter
button. To exit the menu
without making changes, press the
Menu
button.
Ethernet
An Ethernet session is an active network connection between a PC and the unit, with
the user viewing live camera images or accessing data stored on the hard disk.
When the Ethernet menu item is first selected, a message appears to warn the user
that the machine may restart if any values change. To continue, Select
OK
to continue.
The
Ethernet Settings
menu is displayed, and this menu is used to adjust the Ethernet
settings for the network. Use the
Shuttle
to navigate to the desired setting, then use the
Jog
to adjust the value. Consult with your local MIS personnel before making Ethernet
setting changes.
To confirm the selection and exit the menu, press the
Enter
button. To exit the menu
without making changes, press the
Menu
button.
How the unit handles an Ethernet session
During the Ethernet session, the unit can only be accessed remotely, using the WaveReader software. Playback stops
when an Ethernet session is started. Playback will not be re-activated automatically when the Ethernet session ends.
MULTIPLEXER FORMAT
The DTL-960e is compatible with several different brands of multiplexers. Use this
menu to specify the Playback format of the multiplexer. If the unit is not connected to a
multiplexer, select
None
.
If the unit is connected to a multiplexer, use the
Jog
to select the multiplexer format. To
save the changes and exit the menu, press the
Enter
button.
To exit the menu without
making changes, press the
Menu
button.
OFF
ON
Baud Rate
Ethernet
1200 Baud
2400 Baud
4800 Baud
9600 Baud
19200 Baud
38400 Baud
57600 Baud
None
ZMX
Robot
Dm
Philips
Sanyo
Pelco
Ethernet : DISABLE
IP Address : 10. 90.253. 10
Subnet Mask : 255.255. 0. 0
Gateway : 10. 90. 0. 1
[CANCEL] [OK]
Ethernet Settings
All manuals and user guides at all-guides.com
all-guides.com
