Baumuller b maXX BM1000, Manual

Page: 111 / 176

Shutdown, storage
Manual b maXX
®
BM1000
Document No. 5.07003.04
111
of 174
11
11.5 Storage conditions
The device is maintenance-free. If you keep to the environmental conditions during the
entire period of storage, you can assume, that the device will not be damaged. In case
the environmental conditions during storage are not kept, you should assume that the de-
vice is damaged after storage.
The device should be kept in the shipping carton or crate before installation. In order to
retain the warranty coverage, the device should be stored properly when it is not to be
used for an extended period of time.
m
Store in a clean and dry location free from direct sunlight or corrosive fumes.
m
Store within an ambient temperature range of -20 °C to +60 °C (-4 to 140 °F).
m
Store within a relative humidity range of 0 % to 90 % and non-condensing environment.
m
Store within an air pressure range of 86 kPa to 106 kPa.
m
Store within a vibration of: <20 Hz: 9.80 m/s² (1 G) max.
20 - 50 Hz: 5.88 m/s² (0.6 G)
m
Store within a pollution degree of 2 (good for factory type environment).
11.6 Recommissioning
Execute commissioning as with a new device, see
Z
Mounting
–
from page 33,
Z
Installation
–
from page 43
CAUTION
The following can occur , if you disregard this warning instruction:
m
Property damage
The danger is: incorrect environmental conditions. Incorrect storage can damage/destroy
the device.
Assure, that the environmental conditions are kept during the entire period of storage:
m
DO NOT store in an area with rapid changes in temperature. It may cause condensation
and frost.
m
DO NOT place on the ground directly. It should be stored properly. Moreover, if the sur-
rounding environment is humid, you should put exsiccator in the package.
m
If the device is stored for more than 3 months, the temperature should not be higher than
30 °C. Storage longer than one year is not recommended, it could result in the degradation
of the electrolytic capacitors.
m
When the device is not used for a long time after installation on building sites or places with
humidity and dust, it's best to move the device to an environment as stated above.