PAGE 25 TP10313
6.3 Machine Run Error Messages
Machine Run Error Messages help the operator to indicate a production problem.
ENGLISH
GERMAN
CODES
TYPE
DESCRIPTION
Stop
Stop1
Stop1
Information One of the stop buttons is depressed.
ACTION
: Make sure all
stop buttons are cleared and connectors X21, and X22 are
seated.
Wrng Sht
Fehlerbg
Stop2
Machine
The Wrong Sheet Detector has been tripped.
ACTION
: Clear
Run Error
the fault. NOTE: If the main drive was running, the error
condition will remain latched until the Drive START is pressed.
2 Sheet
Doppelbg
Stop3
Machine
The Double Sheet Detector has been tripped.
ACTION
: Clear
Run Error
the fault and check X22. NOTE: If sheet feed was active, the
error condition will remain latched until the Sheet Start is
pressed.
No Feed
Bog.Fehl
Stop4
Machine
No paper detected within 40 cm of suction valve actuation,
Run Error
while running in an automatic feed mode.
ACTION
: Check
misfeed, connector X14, and the condition of the count photo-
eye.
Feeder
Sensor
Stop5
Machine
Photo-eye at suction valve is covered before Sheet Start is active.
Run Error
Long Sht
Bg.Lang
Stop6
Machine
The count photo-eye has been covered for more than 150% of
Run Error
the user set sheet length distance.
ACTION
: Check misfeed,
connector X14, and the condition of the count eye.
Knife 1
Schwert1
Stop7
Machine
The knife input 1 has been active for more than 1.5 times the
Run Error
last measured time.
ACTION
: Clear the fault.
Knife 2
Schwert2
Stop 8
Machine
The knife input 2 has been active for more than 1.5 times the
Run Error
last measured time. ACTION: Clear the fault.
Knife 3
Schwert3
Stop 9
Machine
The knife input 3 has been active for more than 1.5 times the
Run Error
last measured time.
ACTION
: Clear the fault.
Snsor DN
Stpl Ab
Stop 10
Machine
The Pile has been moving down for more than 2.5 seconds
Run Error
while the unit is feeding paper.
ACTION
: Check Pile Sensor.
Snsor Up
Stpl Auf
Stop 11
Machine
The Pile has been moving up for more than 1.5 seconds while
Run Error
the unit is feeding paper.
ACTION
: Check Pile Sensor.
Table 18. Machine Run Error Messages
