Bauer Separator Compact Page 2 Operating Manual Download | Manualshive

Page: 2 / 39

background image

II

Operating Manual for

Bauer Separator Compact

S

Thank you for buying a BAUER separator!

This

operating manual

is an important document that describes the operation and maintenance of

the

BAUER SEPARATOR.

All information contained in this manual is based on the latest product details available at the time of
printing. If you need still more information, please ask your dealer or contact the

BAUER

company

directly.

Please note that the content of this manual neither constitutes part of nor alters in any way any previ-
ous or existing agreement, promise or legal relationship.

BAUER

’s obligations are based solely on

the respective purchase contract, which also contains the complete and only valid warranty agree-
ment. Said contractual warranty is neither extended nor limited by the content of this manual.

The

BAUER SEPARATOR

is designed for safe and reliable operation provided it is operated in ac-

cordance with this operating manual.
You should therefore study this manual thoroughly before starting your

BAUER SEPARATOR

! Strict-

ly observe all instructions pertaining to system handling, operation and service!

If these conditions are ensured, the

BAUER SEPARATOR

will operate to your complete satisfaction

for many years to come.

The content of this operating manual is the intellectual property of the company

BAUER GesmbH

and/or its supplier companies. The available information may only be used in connection with the cre-
ation of specification-compliant documents in the course of an order from the

BAUER

company.

Without express written permission from the

BAUER

company, no reproduction or sharing of this

operating manual is permitted, even in excerpts.
The

BAUER

company reserves the right to make changes at any time without notice and without as-

suming any liability!

In the interests of a clearer presentation and due to the large number of possibilities, this operating
manual does not contain all detailed information and, in particular, cannot address every conceivable
operating and maintenance situation.

WARNING

Failure to follow this manual may cause personal injury or damage the

equipment!

NOTE

This manual is to be considered an integral part of the

BAUER SEPARATOR

. Sup-

pliers of both new and used systems are advised to put down in writing that they
delivered the manual together with the system.

Please make this manual available to your staff. State the pump type and serial number of your

BAUER SEPARATOR

in all inquiries, correspondence, warranty problems or parts orders. You will

find this information on the type plate riveted onto the screen housing of the separator.

We wish you great success with your BAUER SEPARATOR!

«
1
2
3
4
...
»

Summary of Contents for Separator Compact








































Reviews:

No comments

Related manuals for Separator Compact

Brand: Oneida Air Systems Pages: 24

SuperFish X-Pro 1000

Brand: Aquadistri Pages: 12

Brand: Danfoss Pages: 30

Brand: red lion Pages: 8

Brand: Paragon Pages: 8

Brand: 3M Pages: 10

Brand: PurePro Pages: 10

Brand: GE Pages: 84

Brand: Master Water Conditioning Pages: 33

7200/1 170 Plus

Brand: Riello Pages: 16

Brand: ACO Haustechnik Pages: 512

Brand: Evolution Aqua Pages: 20

Brand: Dell Pages: 6

Brand: Dell Pages: 7

Brand: Antunes Filtration Technologies Pages: 18

Brand: Lakos Pages: 2

Brand: brondell Pages: 104

ZENORA RO + UF + MB

Brand: VGuard Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands