Battipav elite 80 9000, Operating Instructions Manual

Page: 19 / 23

30
GB Battipav srl
LASER MARKER
CAUTION
CLASS IIIA LASER INSTRUMENT
23 By means of the laser marker accessory, the
cutting operations can be accelerated.
As a matter of fact, the special laser system
is able to indicate the tool cutting line on the
working table.
CAUTION
THE LASER MARKER STARTS WORKING ONCE THE
MACHINE IS CONNECTED TO THE POWER SUPPLY.
CAUTION
DIRECT EXPOSURE TO SUNLIGHT MAY REDUCE
THE LASER MARKER EffECTIVENESS.
IT IS THEREfORE ADVISABLE TO USE THE
MACHINE INDOORS.
CAUTION
DO NOT MODIfY THE MARKER POSITION BY
TURNING THE BEAM TOWARDS THE OPERATOR’S
EYES.
DO NOT GAZE AT THE BEAM WITH THE NAKED EYE
OR LOOK DIRECTLY WITH OPTICAL INSTRUMENTS.
MARKER ADJUSTMENT
In case the marker is not aligned with the cutting line,
its correct alignment can be adjusted.
In order to correctly position the marker, proceed as
follows:
24 • loosen the three bulb locking screws so that it
can be moved;
24 • insert the 5 mm Allen wrench provided in the
hexagonal slot located on the bulb;
25 • using the Allen wrench, turn the bulb until
aligning the mark with the tool cutting line.
CAUTION
DURING THE ADJUSTMENT OPERATIONS, MAKE
SURE THAT THE LINE PRODUCED BY THE MARKER
DOES NOT REACH THE OPERATOR’S EYES.
CAUTION
ALWAYS KEEP A SAfETY DISTANCE BETWEEN THE
OPERATOR’S EYES AND THE END Of THE LINE.
CAUTION
THE MANUfACTURER DECLINES ANY LIABILITY
fOR THE USE Of THE LASER MARKER IN
APPLICATIONS OTHER THAN THE INDICATED
APPLICATION.
RESIDUAL RISK
During the design phase, BATTIPAV SRL paid
particular attention to the aspects that may generate
risks for the safety and health of operators.
In spite of this, there are still some potential risks,
which are described below:
CAUTION
• Danger of presence of electric current:
The machine has an internal electric system.
CONNECT THE MACHINE TO A SYSTEM WITH
DIffERENTIAL PROTECTION AND EffECTIVE
EARTH WIRE.
CAUTION
• Danger of prolonged exposure to noise:
The continuative use of the machine causes an
exposure to noise levels above 85 dB (A).
OPERATORS MUST USE PROPER EAR
DEfENDERS.
CAUTION
• Danger of exposure to fragments of
materials. OPERATORS MUST WEAR
PROTECTIVE GOGGLES.