Battipav elite 80 9000, Operating Instructions Manual

Page: 15 / 23

26
GB Battipav srl
A
B
C
D
E f
MACHINE DESCRIPTION
The ELITE site cutter is a machine intended
specifically for cutting ceramics, marble, granite,
bricks, concrete items and similar materials, up to a
thickness of 110 mm.
The machine uses a wet diamond tipped tool cutting
system and is intended for personnel specialized in
the construction sector.
The operator works in front of the moving worktop,
within reach of the operating controls, and positions
the material to be cut on the moving worktop.
He/she moves the moving worktop forwards to bring
the material into contact with the tool.
TECHNICAL DATA
Admissible working conditions:
INTERMITTENT - S6 SERVICE 40%
40% Under load running
60% Repose
Rotation speed: 2800 min-1
Condenser: 40 µF
Amperometric circuit breaker: 13A
Thermal circuit breaker: 160°C
IP Degree: 54
Tank capacity (min/max): 19 / 25 L
CUTTING TOOL
DIAMOND BLADE WET CUTTING
CONTINUOUS CROWN:
ceramic, marble, stone, single-fired ceramic
LASER/SECTORS:
cement, natural stones, granite, abrasive materials
(With narrow slots, max 5 mm).
TURBO:
cement, natural stones, granite, refractory
THE TOOL / MATERIAL TO BE CUT MATCHES ARE
PURELY INDICATIVE.
ALWAYS fOLLOW THE INTENDED USE
INDICATIONS PROVIDED BY THE CUTTING TOOL
MANUfACTURER BEfORE ANY APPLICATION.
Water recirculation pump: S2 230V 50Hz
The noise level of the machine has been measured in
compliance with standards UNI EN12418, EN3744.
LW - SOUND POWER LEVEL = 79.8/0.0 dB(A) /mW(A)
LOP - SOUND POWER LEVEL AT THE OPERATOR
POSITION= 68.5 dB(A)
LOP Max - PEAK SOUND POWER LEVEL AT THE
OPERATOR POSITION= 80.7 dB(C)
Measurements have been performed without load
and at maximum speed using a cutting tool with a
diameter of 350 mm, turbo type, Art. 867
In working conditions, the machine creates a noise
emission above 85 dB(A).
The level of vibration transmitted to the hand-arm
system has been measured according to standard
UNI EN ISO 5349-1 while cutting poroton bricks.
(L 280 x W 140 x H 100 mm) using a cutting tool with
a diameter of 350 mm, turbo type, Art. 967.
-Acceleration analysed at =1.15 m/s2 (measurement
uncertainty 0.28 m/s2)
INSTALLATION
TRANSPORT
The ELITE machine can be easily moved by using the
transport handles.
Before transporting the machine, ensure that:
• The sliding carriage is fixed by locking the
carriage;
• The motor head is completely down by the
lever to recovery;
3 • The legs are in transport position