Battipav elite 80 9000, Operating Instructions Manual

Page: 12 / 23

23
Battipav srl GB
“TRANSLATION Of THE ORIGINAL INSTRUCTIONS”
PURPOSE Of THIS MANUAL
This manual is an integral part of the machine.
It was produced by BATTIPAV S.R.L. to provide
those authorised to work with the machine with the
information required for its foreseeable lifespan.
Before starting to use this machine read the safety
chapter carefully.
Each machine is subjected to a series of tests and
carefully checked before leaving our factory.
BATTIPAV S.R.L. is constantly striving to develop
their machines and therefore reserves the right to
make any change without prior notice. Therefore, no
claims may be made on the basis of the data and
illustrations contained in this manual.
SAfETY INfORMATION
• The manufacturer accepts no responsibility
where the ELITE cutter is used with
any tools other than those specified in
the “RECOMMENDED USE” paragraph.
DO NOT USE WOODEN DISCS.
DO NOT USE DRY-CUTTING DISCS.
• ELITE is made to operate exclusively under the
conditions indicated under “TYPE OF OPERATION
ALLOWED”, in the “TECHNICAL DATA” paragraph.
• During cutting operations, allow the machine to
rest as indicated.
• ELITE is not made for use with a continuous load.
CAUTION
DO NOT USE DIAMOND TIPPED DISCS Of LOW
QUALITY OR THAT ARE NOT SUITABLE fOR THE
SPECIfIC USE fOR WHICH THE MANUfACTURER
SUPPLIED THEM. THE USE Of POOR QUALITY
DISCS CAN HARM THE OPERATOR AND DAMA-
GE THE MACHINE, AS WELL AS SIGNIfICANTLY
SLOWING THE WORK.
CAUTION
THE MACHINE IS NOT INTENDED fOR USE IN AN
EXPLOSIVE ENVIRONMENT
CAUTION
ALWAYS USE INDIVIDUAL PROTECTION DEVICES
TO REDUCE THE RISKS CAUSED BY WORK. NEVER
START THE MACHINE WHEN THE CUTTING TOOL
IS MOVING; WAIT fOR IT TO STOP.
Warning! When using electric tools, following
safety precautions should always be followed to
reduce the risk of fire, electric shock and personal
injuries. Read and follow all these instructions
before attempting to operate this product and save
them with care!
SAVE THESE INSTRUCTIONS WITH CARE.
Keep your work area perfectly clean
• Cluttered areas invite injuries.
Consider work area environment
• Don’t expose tools to rain.
• Don’t use tools in damp or wet locations.
Keep work area well lit.
• Don’t use tools in presence of flammable liquids
or gases.
Guard against electric shocks
• Prevent body contact with grounded surfaces.
Keep children away!
• Do not let third parties contact tool or extension
cord. All visitors should be kept away from work
area.
Store your tools in a save place
• When not in use, tools should be stored in dry
and save places, out of the reach of children.
Don’t force tool
• It will function better and in a safer way at the
rate for which it was intended.