![background image](http://html.mh-extra.com/html/battioni-pagani/elba/elba_instruction-manual-for-use-and-maintenance_2708429028.webp)
page 22
Instruction manual
for use and maintenance of series ELBA
Setting the pace since 1953
The maximum permissible angle of the drive shaft is 15°. For no reason must this inclination be exceeded.
The centrifugal pump, when being installed on a machine, must be equipped with protective devices to isolate
the moving parts and prevent the operators from accessing.
When operating the centrifugal pump, it is necessary to use the personal protective equipment prescribed by the
Manufacturer of the machine on which the centrifugal pump has been installed.
3.2 INSTALLATION DIAGRAM
3.3 UNINSTALLING
The ELBA centrifugal pump must be uninstalled according to the following procedure:
1) Stop the PTO of the tractor;
2) Remove the drive shaft from the PTO;
3) Disconnect the centrifugal pump from the tank;
4) Remove the screws of the gearbox;
5) Uninstall the ELBA pump.
To reinstall, proceed as for the first installation.
Summary of Contents for ELBA
Page 2: ......