Rev. A-021009
P/N VDC24041AA-S3-MNL
BatteryMINDer
®
Model 24041-AA-S3
Page 21
INSTRUCTIONS:
TEMPERATURE SENSOR Type: ABS-248
(At-the-Battery Sensor)
MANDATORY WHEN CHARGER IS USED WITH
Sealed or Maintenance-type Aviation batteries,
regardless of construction
Congratulations on purchasing the most advanced
charger-maintainer-desulfator conditioner on the
market today. Read you manual carefully to under-
stand all of its features. Your charger came with the
At-the-Battery Sensor ABS-248. Please read and
fully understand all of the following before beginning
your installation.
Your temperature sensing system is made up of two
components. The thermal sensor w/ ring terminal
and and extension cord (male to male) male plug w/
dust cover both shown below with extension cord
attached. This cord then attaches directly to the
mating female receptacle located on the charger
Do NOT modify by extending or shortening the
extension cord.
Attaching the temperature sensor with extension
cord.
Your first choice should be to connect it to the
Negative (-) post (clamp / screw) of the battery. This
is the best location to sense the temperature of the
battery.
The second choice is to place it as close to the
battery as possible. Attachment of the sensor to
the side or top of battery is also a possible option,
under the right circumstances. Be careful to ensure
it will not come loose in service.
Summary of Contents for 24041-AA-S3
Page 11: ...Rev A 021009 P N VDC24041AA S3 MNL BatteryMINDer Model 24041 AA S3 Page 11 Your Notes...
Page 18: ...Rev A 021009 P N VDC24041AA S3 MNL BatteryMINDer Model 24041 AA S3 Page 18 Your Notes...
Page 24: ...Rev A 021009 P N VDC24041AA S3 MNL BatteryMINDer Model 24041 AA S3 Page 24 Your Notes...
