Rev. A-021009
P/N VDC24041AA-S3-MNL
BatteryMINDer
®
Model 24041-AA-S3
Page 13
Simplified Operating Instructions
(Read and thoroughly understand ALL SAFETY Instructions on pages (3-7) and Qualifying
Your Battery pages 8-11, BEFORE proceeding further.
1. Attach a battery connector assembly (supplied) to output cordset of charger, either the clips or ring
terminal assembly, - NEVER BOTH at same time.
2. Attach output to battery terminals-
RED
band =Po
BLACK
band = Negative.
2-a: Attach temperature sensor ABS-248 to battery and then to charger*.
3. Plug AC power cord into 120 Vac electrical outlet. Observe REVERSED Polarity LED indicator. If lit
RED
, reverse battery connector attachments on battery.
4. Observe
GREEN
LED indicator labeled Charge-Float = Solid when charging, Blinking when main-
taining battery(s).
Charger will automatically start within 30 seconds or less.
5. Observe Battery Connected - Error Indicator, LED Must be lit
GREEN.
**
IF IN DOUBT REGARDING ANY OF THE ABOVE, REFER TO FULL INSTRUCTIONS
* See detailed instructions for need and method of properly connecting sensor to battery, pgs. 21 - 24.
** See full instructions if not lit
GREEN
.
Summary of Contents for 24041-AA-S3
Page 11: ...Rev A 021009 P N VDC24041AA S3 MNL BatteryMINDer Model 24041 AA S3 Page 11 Your Notes...
Page 18: ...Rev A 021009 P N VDC24041AA S3 MNL BatteryMINDer Model 24041 AA S3 Page 18 Your Notes...
Page 24: ...Rev A 021009 P N VDC24041AA S3 MNL BatteryMINDer Model 24041 AA S3 Page 24 Your Notes...
