Real-Time Trigger Functionality
AW00101510000
104
Basler IP Fixed Dome Cameras
7.3
Real-Time Triggering Impact on Streams
When you are setting the
Streaming
group parameters on the
camera, remember that because the real-time trigger operates at
the sensor level, it impacts all enabled streams. So, for example,
if you enable three streams, each image capture initiated by a
real-time trigger signal will be transmitted in all three streams.
If the
Encoder Type
parameter for a stream is set to "JPEG",
"MPEG4", "H.264 Base Profile" or "H.264 High Profile", the
images captured as a result of the real-time trigger will be
transmitted from the camera as part of the normal image stream
as illustrated in Figure 19 on
page 101
.
If the
Encoder Type
parameter for a stream is set to "JPEG
(triggered)" as shown to the right, the stream will only include
images captured as a result of using the real-time trigger. The
images in the stream will be motion JPEG encoded.
