AW00101510000
Terminal Blocks and Audio Connector
Basler IP Fixed Dome Cameras
87
Hole Name:
DC Out
Function:
DC Out supplies unreg5.6 VDC and can be used to power a small device such as a relay.
The maximum allowed load on DC Out is 50 mA.
If an inductive load such as a relay is used with DC Out, a diode must be connected in parallel with the load.
By default, the I/O port 0 is set as an output with its function set to user settable
and I/O port 1 is set as an input with its function set to monitor. The explanations
in Table 3 and the schematic on
page 88
assume that you have changed the port
settings.
Table 3: Main Terminal Block Wire Fixing Hole Assignments
