Configuring the Camera
AW00101510000
18
Basler IP Fixed Dome Cameras
IR Filter Wait Time
- Sets the amount of time in seconds that the value of the
IR Filter Current
Level
must remain above the
IR Filter Switch Level
setting before the camera will switch from day
mode to night mode. It also sets the amount of time in seconds that the value of the
IR Filter
Current Level
must remain below the
IR Filter Switch Level
setting before the camera will switch
from night mode to day mode.
3.3.4
Focus Tab
Note:
The
Focus
tab is only available on camera models with autofocus functionality. To find out if
your camera offers autofocus, check the specification tables in Chapter 8 on
page 105
.
To adjust the focus during the installation process, first use the
One Push Focus
button on the left
side of the Basler toolbar (see
page 11
). Use the
Focus Move
command buttons only for
readjustment steps.
A feature called the IR filter announce mode can use one of the camera’s I/O ports
to "announce" the current mode (night or day) of the IR-cut filter. For more
information,
page 95
and also Section 3.9.1 on
page 59
.
Focus Position
- Indicates the relative focus position between
near (N) and far (F).
Focus Move
- Moves the focus stepwise.
You can use the
Focus Move
buttons to readjust the focus, if
necessary.
Clicking the command buttons moves the lens in fine (>), medium
(>>), or coarse (>>>) steps to focus near (N) or far (F) objects.
