Basler BE1-50B-230, Instruction Manual

Page: 3 / 71

9252000894 Rev D BE1-50/51B-230/-234 Introduction i
INTRODUCTION
This instruction manual provides information about the operation and installation of the BE1-50/51B-230
and BE1-50/51B-234 Overcurrent Relays. To accomplish this, the following information is provided:
•
General Information and Specifications
•
Controls and Indicators
•
Functional Description
•
Installation and Maintenance
•
Testing
WARNING !
To avoid personal injury or equipment damage, only qualified personnel should
perform the procedures in this manual.
NOTE
Be sure that the relay is hard-wired to earth ground with no smaller than 12 AWG
copper wire attached to the ground terminal on the rear of the unit case. When
the relay is configured in a system with other devices, it is recommended to use a
separate lead to the ground bus from each unit.