base engineering FWG09, Assembly Instructions Manual

Page: 17 / 26

FWG09I Assembly instructions
17
required car with “ * <Car> # ”, the PSS09 gives the indication “ Voice connection <Car> on. Please
enter*0# to terminate the voice connection ” and you can talk to the car. To end the call use ” *0# ” as
normal. If you want to talk to other cars during the call, you can still dial the next car via “ * <Car> # ”.
Call back for program 3, 3A, 3B
In program 3, the reference “ Voice connection 1 on. Please enter*0# to terminate the voice
connection ” follows directly after the answer tone and the voice communication to the 1st car is
established. In order to be able to speak to the other cars, you first have to terminate the voice
communication to car 1 with “
*0# ” and then establish a new voice communication with “ * <Car> # ”.
Example emergency call, car 1, program 1, no PIN
For alarms from the car, the sequence is as follows:
1. Alarm is triggered, unit dials programmed telephone number.
2. Call is accepted, then an announcement from the unit is made: “ Object number < Object> ”,
then the messages:

“ Emergency car 1 ” – alarm triggered in car 1 or

“ Misuse car 1 ” – misuse alarm triggered in car 1.
And the instruction “ Please enter *1# to accept the emergency call ”.
3. Establish a voice communication: “ *1# ”. Response from unit: “ Voice connection 1 on. Please
enter *0# to terminate the voice connection ”.
4. Speak to person who is trapped.
5. Disconnect voice communication: “ *0# ”. Response from unit: “ Voice connection 1 off.
Emergency over ”.
6. Hang up
Only after disconnecting the voice communication and the response “ Voice connection 1 off.
Emergency over ” is the alarm deleted and the unit stops dialing.
Example technical messages, car 2, program 1, no PIN
A final call is made in the event of a power failure shortly before the battery is empty:
1. Unit dials extension.
2. Call is accepted, then an announcement from the unit is made: “ Object number < Object> ”,
then the messages:

“ Power failure car 2 ” – Unit is running on battery power.

“ Final call car 2 ” – Battery is almost empty.

“ Please shut down the elevator ” – After this call the PSS09 switches itself off, further
emergency calls are no longer possible.

“ Please enter *2# to clear the notifications ” – Indication of acknowledgement.
3. Delete messages: “ *2# ”. Response from unit: “ Messages cleared ”
4. Hang up
5. The unit switches itself off.
Not until after the answer “ Messages cleared ” is the message considered to be acknowledged and
the unit stops dialing.