FWG09I Assembly instructions
14
Program 2
Only the messages Alarm, Emergency Over, Misuse, Battery broken, Battery missing and
Final call are generated. Furthermore, alarms are cancelled when the voice communication is
established.
Program 2A
In addition to the messages from program 2, the Periodic call is also reported.
Program 3
Only the messages Alarm and Misuse are generated. No acknowledgement is needed as
the voice connection is always enabled. PSS09 will terminate the connection after the gatekeeper’s
intercom has hung up. If there is no busy tone, the device will hang up after 60 or 120 seconds.
WARNING: Since a voice connection is always set up and an acknowledgment is not necessary, a
second telephone number in Program 3 does not make sense because the alarm is always deleted
after dialing the first telephone number.
The call-back is made simply by dialing the unit. After 8-10 seconds the voice connection is enabled
without further authentication.
The unit still responds to all sent DTMF commands regardless of this.
Program 3A
Same as program 3, the object number is announced twice before establishing the
voice connection.
Program 3B
Like program 3, but a voice connection to the car is established without any further
announcements.
Acknowledgement of messages
There is the possibility to set a four-digit PIN to ensure that only trained personnel can acknowledge
the messages. If this is not set, the messages can be acknowledged by “*
<Car>
#” where
<Car>
is the
respective car number.
DTMF Codes
PIN and Acknowledgment
*xxxx*
Send four-digit PIN; valid as acknowledgement.
*
<Car>
#
Acknowledgement if PIN is not set.
*xxxxxx*
Send the six-digit master PIN in order to program the unit.
Voice communication
*
<Car>
#
Enable a voice communication to car
<Car>
.
*0#
Disconnect voice communication or renewed announcement of object number and car
if there is no voice communication.
Programming codes (Entry with master PIN necessary)
*9 00 abcd #
Set four-digit PIN.
*9 00 #
Delete PIN
*9 01 … #
…
*9 05 … #
Set first to fifth telephone number. These numbers are dialed without evaluating the
dialing tone in blind dialing mode.
*9 99 00#
All parameters are announced, saved and the device reboots.
