Bartscher 700 Series, Instructions For Installation, Use And Maintenance Manual

Page: 20 / 22

202/208
The pilot burner lights off after
loosening the igniter knob

Check that the flame of the pilot burner laps the
thermocouple; if this is not the case, adjust the pilot
burner through the regulating screw on the valve

Press the gas knob in its correct position

Change the thermocouple

Check if the valve magnetic group is rusted

Check the gas valve
The pilot burner stays on but the main
burner does not light on

Check that gas inlet pressure is the same as that shown in
table BURNER FEATURES

Check that the gas nozzles are not blocked

Check that the burner holes are not blocked

Check that the gas pipe is not blocked

Check that the nozzles installed are in accordance to
table BURNER FEATURES

Check the gas valve
Slow and/or inadequate heating

Check that gas inlet pressure is the same as that shown in
table BURNER FEATURES

Check that the nozzles installed are in accordance to
table BURNER FEATURES

Check the gas valve
No heating

Check the power supply

Check the condition of the heating element

Check the thermostat
No indicator light

Check the power supply

Check the light bulb
Slow and/or inadequate heating

Check the setting of the thermostat

Check the condition of the heating elements

Check the quantity of food to be cooked
INSTRUCTIONS FOR USE

The braising pan is universal equipment: it is suitable for roasting, cooking and grilling meat,
fish, vegetables, eggs, farinaceous food, and for cooking soups, sauces and risottos.

ATTENTION: The appliance cannot be used as a fryer.

ATTENTION: The cooking vat of the appliance must not be cooled down hard (i.e. cooling it down
by ice or cold water); otherwise there is a danger of cracking the cooking vat itself.
Gas Bratt Pan
In order to switch on the braising pan burner, proceed in the following
way:
- Turn the knob (1) from the off position

to the ignition position
;
- Press down the button;
-
Press the piezoelectric lighter button (2) to light the pilot burner;
- Keep the knob pressed down until the thermocouple heats up,
keeping the pilot on; this can be checked through the slit on the front
of the appliance;
-
Switch on the main burner by turning the knob to ;