Cleaning and Maintenance
117623-117723
69 / 74
EN
Control Panel Ventilation Filter
Clean the control panel ventilation filter at least
once a month.
1. Pull the ventilation filter from its holder by
holding it with your fingers.
2. Clean the ventilation filter manually with use
of water and soap. Rinse with fresh water
and then leave it to dry.
It is recommended to replace the ventilation
filter at least once a year or even more
frequently if the appliance is operated in
environments featuring high concentration of
flours or similar substances.
Fig. 53
If the ventilation filter is damaged or worn, it must be replaced. It should be ordered
as a spare part from the supplier.
7.3
Maintenance
• Regularly (at least once a year), have an authorized and specialised personnel
verify the appliance. To this end, contact the service company.
• Before attempting any maintenance works, disconnect the power supply, close
water supply and completely dry the appliance.
• Before moving the appliance into a new location, disconnect power and water
supply lines, as appropriate.
• If the appliance is part of a system equipped with rollers, check if the electrical
wiring, piping installation and hose connections have not been damaged during
moving.
• After moving the appliance into a new location, and prior to its start-up, make
sure that all electrical and water connections have been executed following
standard regulations in force.
