- 81 -
7.2 Cleaning
Regular cleaning of the device chamber
o
The shelves rails may be removed from the device for easier cleaning. To do this,
unscrew the fixing bolts and remove the rails.
o
Clean the device chamber only with lukewarm water and gentle cleaning agent.
All washed surfaced should be rinsed with clean water and thoroughly dried.
Pay attention to not to leave any washing agent residuals.
External cleaning
o
Clean the external surfaces of the device only with cloth soaked in water.
o
Use only agents designed for cleaning of high-grade stainless steel, as improper
cleaning agents may cause corrosion of the device.
o
Do not
use the agents containing chlorine (bleachers, hydrochloric acid, etc.).
o
After cleaning dry and polish the surface with dry cloth.
Cleaning of the device door
Fig. 47
o
Before cleaning of the door the device must
be completely cooled down.
o
Double glazing facilitates cleaning. The internal
glass may be opened.
o
To do this, loosen the upper and lower steel plate
locking the internal glass. Rotate the plates
clockwise.
o
Tilt the internal glass (
fig. 47
).
o
Clean the internal glass on both sides and the
device door with use of appropriate agents.
o
Do not
use any aggresive and abrasive cleaning
agents.
o
Close the internal glass and put the steel plates in
the initial position.
CAUTION!
Before closing of the device make sure that the internal glass is fixed with the
steel plates, otherwise it will not be possible to close the door.
