- 55 -
5.2 Setup
•
In the beginning make sure that there are no elements blocking the way to the
installation place through the doors, corridors or other communication routes.
•
CAUTION:
The device may overturn during transport, which may damage the device
itself, other objects or cause the injuries. Use the means appropriate for the device
weight. The device should not be dragged or tilted, but lifted perpendicularly to the
ground and handled in the horizontal direction.
•
Before positioning the device check the dimensions and exact positions of the
electric, water, and extraction connections.
•
The device must be positioned in a room with sufficient ventilation (not outdoors) in
order to avoid excessive concentration of harmful substances in the air.
•
We recommend to position the device under the hood or to remove hot vapours and
odours from the device chamber outside.
•
Remove the external package (wooden crate and/or carton box) and utilize it
according to the regulations valid in the country of installation.
•
Check the device for damages and position it in the operation place.
•
Never
position the device in the vicinity of the flammable materials or containers with
such materials (walls, furniture, partition walls, gas cylinders) as it may cause the fire
hazard. When it is not possible, insulate such materials with use of non-flammable heat
insulation, following all fire protection regulations.
•
The device must be positioned on the even surface to avoid its slipping or turning
over.
•
The floor in the installation place must have load carrying capacity sufficient for
weight of the device, its base and weight with full load.
Fig. 1
The device
is not designed for installation
in the furniture
and it is required to keep
the
minimum distance of 50 mm
from the walls
and other devices (
fig. 1
).
Assure the possibility of full opening of the glass
door (180°).
Position the device in such way that its back side
is easily accessible for connecting the electric and
water supply and for maintenance.
