- 74 -
Fig. 31
Fig. 32
Then set the cooling temperature by
pressing the temperature symbol
S2
(
fig. 32
) and rotating knob
M
. Confirm by
pressing knob
M
or window.
Hint:
In
AUTOMATIC COOLING
the
„Time“
value cannot be set as that phase
lasts as long as the preset temperature of
the device chamber is reached.
In order to shorten the automatic cooling
phase it is required to keep the fan speed
and the vapours outlet position which are
automatically selected by the device.
The automatic cooling may be set
up to 100 °C.
That phase must be realized with closed
doors. The door opening interrupts the
AUTOMATIC COOLING
.
After switching of preset cooling
temperature the device switches to the
next phase (if it is planned).
6.4.14 Manual cooling of the device chamber
Fig. 33
The cooling function allows for quick
temperature reduction in the device
chamber.
In order to realize the cooling cycle the
device must be in
STOP
mode. Select the
cooling key
S9
(
fig. 33
), press
T2
„Start/Stop“
(
fig. 8, page 62
) and open
the door.
Hint:
Due to the safety reasons the cooling
must be activated with closed door.
The door must be opened only after
pressing
START
key.
Roasting
Phase 2/2
Cooling
Phase 1/1
Wed 16-04-14 16:15
Wed 16-04-14 16:15
Wed 16-04-14 16:15
