- 75 -
Fault
Reason
Solution
Uneven
cooking/baking
•
The fans do not reverse
the rotation direction
•
One of the fans does not
work
•
One of the resistors is
broken
•
Contact customer service
•
Contact customer service
•
Contact customer service
The light is
turned off
•
The lamp is loose
•
The lamp is burnt out
•
Place the lamp in the
holder correctly
•
Replace the lamp as
described in the section
"Replacing the lamp".
When pressing the
humidification key
or turning the rotary
button no water
flows out of the
hoses
•
The water inlet is closed
•
The water supply
connection has not been
established properly
•
The water inlet filter is
clogged with dirt
•
Open the water shut-off
valve
•
Check the water supply
connection
•
Clean the water filter
When the device
door is closed water
leaks through the
seal
•
The seal is dirty
•
The seal is damaged
•
There is a problem with
closing the device door
•
Clean the seal with a
damp cloth
•
Contact customer service
•
Contact customer service
The fan stops
during operation
•
The safety thermostat of
the fan motor has been
activated
•
Turn off the combi steamer
and wait until the thermal
protection restarts the
motor automatically.
Should the problem repeat,
contact customer service.
The above problem cases are just examples for your orientation. If such or similar
problems occur, you should immediately turn off the device and stop using it.
If the defects cannot be removed, you must immediately contact customer service
or your dealer. Please quote the article and serial number of the device; this data
can be found on the nameplate of the device. Never attempt to make any repairs
on your own.
