- 70 -
To call up one of the preprogrammed programmes:
press the P/M key until P01 appears on the Operation Display;
by pressing the selection keys + or - select the number of the programme;
press the START/STOP key to start the programme.
It is possible to generate and save new individualized programmes from the
programme's memory field 17. Proceed as follows:
press the P/M key until P01 appears on the Operation Display;
by pressing the selection keys + and - select the number of the programme
to be saved;
Once you have found a free programme (or an already existing one that you
want to change), the control lamp F1 will light up on the Timer display. Set the
parameters (temperature, time/temperature of the core temperature sensor, fan
speed, steam, steam extractor) of the phase F1;
After pressing the key F, the control lamp F2 will light up and you can continue
with setting the second phase. In the same way set also the third and fourth
phase. To cancel a phase, simply set the Timer rotary button at END.
Once you have completed the setting process, press the Memory key in the
Activation area and keep it pressed until the memory control lamp starts to blink.
Now the programme is saved. It is recommended to maintain written records for
the generated programmes in order not to forget them.
To check whether a programme has been already set or is free, simply watch the
indications appearing on the display; when a programme is free, the values END,
30°C and 00 steam will appear.
You can change already saved programmes by following the same steps as in case
of setting a new programme.
You cannot delete a programme; it is only possible to change a programme.
The only programme that cannot be changed is programme No. 16 – Cooling.
P16 - Cooling programme
This programme allows for quick cooling of the device by making it possible to open
the device door during operation without stopping it.
The fan motors continue to work, however, the humidification system and heating
elements remain inactive. The programme is stopped manually by pressing the
START/STOP key once the selected temperature has been reached.
Note: when executing programme No. 16 "Cooling" it is forbidden, for any reason
whatsoever, to remove the fan housing and to touch the fans or the heating elements
as long as they are moving or are hot.
