BARTINGTON INSTRUMENTS
DCN1040
Page 30 of 39 OM3100/2
To set up a new connection or to choose which Grad13 to connect, select the ‘Connect’ button
and a new window, shown in figure 27, will pop up.
Figure 27: Grad-13 Connection Window
This window allows you to select and choose which Grad-13 to connect. The desired Grad-13
can be chosen from the list and then connected using the ‘Connect’ button. The window in figure
26 will then display ‘Connected’ next to the Grad-13 if successful. If an error is displayed, the
settings for this Grad-13 will need to be reviewed by selecting ‘Configure Connections’.
If no Grad-13 gradiometers have been set up, they will need to be added using the ‘Configure
Connections’ button. This button will display the window in figure 28.
Figure 28: Adding Grad-13 connections
‘Add’
: use this button to add a new connection, see figure 29.
‘Edit’:
this button can be used to edit an existing selection, which can be chosen from the list on
the left hand side of the window.
