Bartec PBTC-300, Operation And Installation Manual

Page: 28 / 52

Operation and Installation Manual PBTC-300
21-54C3-7D0002/-
01/2022-EHT-441169
Notice: Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Seite 26 / 49
CAUTION
The silicone adhesive may cause irritation to skin and
eyes. Avoid eye contact. Avoid repeated or prolonged
skin contact. In case of contact with eyes, rinse with
water and seek medical advice.

Put silicone adhesive onto the exposed heating element and
insulation jacket

Thread the bus wires into the silicone pants

You might add further silicone adhesive to ensure optimal
sealing

Slide the silicone pants all the way onto the heating ele-
ment
Installation of the mounting stand

Insert the 2 fixing screws (ISO 2009, M5x20) into the base
plate. Note the alignment of the lowering

Install the base plate on the mounting stand

Install on each of the 2 fixing screws:

a washer (ISO 7089, Type B, M5)

a split washer (DIN 127, Type B, M5)

a nut (ISO 4032, M5)

Tighten the screws using a screwdriver
20
21
19