ULTRASAMPLER® sample collection system
186
Measuring System MAK TIGER 3003 Service manual, SA 131128, 10.03.2020
Note:
Do not turn the branch pipe until the sampler and bottle drive have been
fitted in the exact position.
Sampler and branch pipe
Fitting the sampler on the branch pipe
Attach the two sampler holders to the steel sections of the branch pipe
from below. Screw each of the holders onto the steel sections with an
M8 x 20 hexagon socket screw.
Connecting the sampler and branch pipe
Fit M6 x 0.75 union nut on the free end of the pump hose (1). Fit pump
hose on intake cannula in welded socket (2) and tighten union nut (3).
