Bartec 17-A1Z0-0005, Installation Instruction

Page: 3 / 16

Installation Instruction
(Translation)
HART Add-On Module
Typs 17-A1Z0-0005 , B7-A2Z0-0033 and G7-A0Z0-0007
Technical data subject to change .
Revison A - 09/2016
EN 1/12
Basic Information
Read carefully before putting the device into operation.
The Installation Instruction is a fixed part of the product. It must be kept in the direct
vicinity of the device and the installation, operating and service staff must have access
to it at all times.
More detailed instructions of use can be found at www.bartec.de as well as t he current versions of
the datasheets, user manual, certificates and EU declaration conformity or may be requested directly
from BARTEC GmbH.
Knowledge of the safety and warning information and the strict compliance with it is essential for
safety installation and use. Injuries and material damage can be avoided by circumspect handling
and systematically following the instructions.
The BARTEC company reserves the right to carry out technical changes at any time.
Maintenance and Repairs
The pertinent erection and operating provisions for electrical systems
must be observed! Repairs to explosion-protected devices may only be performed by authorised
personnel with original spare parts and according to the state of the art. The applicable provisions
must be observed in this respect.
Inspections
According to EN/IEC 60079-17 and EN/IEC 60079-19, the operator of electrical
systems in potentially explosive atmospheres is obliged to have these inspected by an electrician to
ensure correct condition.
Warranty
If non-specified components are used, the explosion protection will no longer be
guaranteed. In the case of externally procured parts, it is not guaranteed that these have been
designed and manufactured in accordance with their load and requisite safety.
Disposal
As professional electrical devices, our devices are intended exclusively for commercial
use, so-called B2B devices, in accordance with the WEEE Directive. Observe the national waste
disposal regulations when disposing of the devices. All products purchased from us can be returned
to us by our customers for disposal. The sender shall bear the costs of postage and packaging.