Installation Instruction
(Translation)
HART Add-On Module
Typs 17-A1Z0-0005 , B7-A2Z0-0033 and G7-A0Z0-0007
Technical data subject to change .
Revison A - 09/2016
EN 6/12
Introduction
The intrinsically safe combination of the tablet PC system and the newly developed HART Add-On
Module makes it possible to perform diagnostics, set parameters and manage field devices much
more quickly and efficiently. The HART modem is used as an add-on module for the tablet PC
system in its extension interface. Since the user is now able to switch safely between the Ex and
non-Ex area, only one device is then needed for the wireless uploading or adjusting of the field
devices distributed there, completely independently of the control system.
Scope of delivery:
-
1x HART Add-On Module
-
2x Pan head screw M3x10
-
2x Pan head screw M3x7
-
2x Truss head screw M3x7
-
2x Connection cable
-
2x Test probes
-
1x Installation instruction HART Add-On Module
DANGER
The extension interface of the tablet PC must always be sealed in a potentially explosive
atmosphere! There is a risk of explosion!
Only remove or mount the cover of the extension module outside the potentially explosive
atmosphere.
Only assemble/dismantle the HART Add-On Module outside the potentially explosive
atmosphere.
Risk of short circuiting if the screws supplied with delivery are not used.
Carry out the correct assembly for the attachment.
Use the screws supplied with delivery. All screws must be used to ensure the safe
mechanical assembly of the HART Add-On Module on the tablet PC.
Store the cover of the extension port safely.
Summary of Contents for 17-A1Z0-0005
Page 1: ...HART Add On Module Installation Instruction...
Page 15: ......
