Installation Instruction
(Translation)
HART Add-On Module
Typs 17-A1Z0-0005 , B7-A2Z0-0033 and G7-A0Z0-0007
Technical data subject to change .
Revison A - 09/2016
EN 2/12
Safety Instructions
The HART Add-On Module may only be operated in a clean, undamaged
condition and may only be deployed within the specified temperature class and the temperature
range indicated for it. Special Conditions for explosion protection must be observed. The
assembly/dismantling must be conducted by qualified personnel authorised and trained to install
electrical components in potentially explosive areas. The use in areas other than those specified or
alteration of the product releases BARTEC from liability for defects and further liability. Modifications
and changes to the module are not permitted. The generally applicable statutory regulations and
other binding guidelines on occupational health and safety, on accident prevention and on
environmental protection must be complied with.
Danger, Warning and Note Symbols
Safety instructions and warnings are specially
highlighted in this installation instruction and marked by symbols.
DANGER
The DANGER sign draws attention to a direct threat which if not avoided will lead to death or very
serious injuries.
WARNING
WARNING draws attention to a possible threat which if not avoided can lead to death or very
serious injuries.
CAUTION
CAUTION draws attention to a possible danger which if not avoided can lead to slight or minor
injuries.
ATTENTION
ATTENTION draws attention to a potentially damaging situation which if not avoided can cause
damage to the equipment or to objects in its vicinity.
Important instructions and information on effective, economical & environmentally
compatible handling.
Summary of Contents for 17-A1Z0-0005
Page 1: ...HART Add On Module Installation Instruction...
Page 15: ......
