Barry-Wehmiller Accraply 204RH, Operation And Maintenance Manual

Page: 21 / 97

13 SECTION 1: SYSTEM OPERATION
1.2 Introduction
The purpose of this manual is to provide machine operators and maintenance personnel with the necessary
information to set up, operate, and maintain the Accraply Labeler.
CUSTOMER SERVICE AND SPARE PARTS
Customer service contact and ordering instructions for spare parts, non-spare parts and non-engraved parts,
recommended spare parts lists and the part order form.
SECTION 1: SYSTEM OPERATION
1.1 Safety Procedures: General and maintenance safety guidelines. Specific cautions and warnings which must be
observed during operation are highlighted.
1.2 Introduction: Summary of the Operation and Service Manual contents.
1.3 General Information: Shipping and handling information, service requirements, installation procedures, technical
data, general system layout, system process, alarm light stack and sensor details.
1.4 Setup and Adjustments: Provides maintenance and operating personnel instructions on setting up the machine,
product change-over procedures, and adjustments that may be necessary for proper functionality of the machine.
1.5 Operating Procedures: Provides information to the machine operator on how to run the machine and use it’s
controls.
1.6 Maintenance: General information, preventative maintenance and troubleshooting tables.
SECTION 2: SYSTEM PARTS
2.1 Drawing List: List of included system assembly drawings.
2.2 System Parts List & Drawings: List of the parts detailed in the each assembly and the corresponding drawings.
Assembly drawings and parts lists for the labeling head(s) that are not found in this manual can be found in the
Labeling Head Operator and Service Manual that was shipped with the machine.
SECTION 3: ELECTRICAL DRAWINGS
3.1 Electrical Drawing List: List of electrical drawings.
3.2 Electrical Drawings: Electrical drawings, firmware version and serial numbers.
SECTION 4: APPENDIX
4.1 Appendix: Technical specifications and setup instructions for sensors and major components in the system. Refer
to these sources for information not contained in the system’s Operation and Service Manual.
INTRODUCTION