Barry-Wehmiller Accraply 204RH, Operation And Maintenance Manual

Page: 42 / 97

34 SECTION 1: SYSTEM OPERATION
MAINTENANCE
PROBLEM PROBABLE CAUSE SOLUTION
6 Motor sounds
“rough” or
vibrates.
Overloaded motor caused
by restriction of labels and/or
backing paper as it passes
through the machine.
Check all solutions listed under Items
2 and 5 above.
Defective motor. Replace motor.
7 Labels feed
continuously.
Translucent labels (cannot
be “seen” by label sensor).
Check label opacity and notify
Accraply (see Customer Service on
page i).
Label sensor out of
adjustment.
Adjust label sensor light and/or
sensitivity.
8 Label roll
rotates without
stopping.
Unwind not adjusted
properly.
Adjust unwind to provide more brake.
9 Label web
sags between
dispense
tip and
rewind after
dispensing a
label.
Rewind not adjusted
properly.
Adjust rewind to provide more
clutches.
10 Malfunction of
valve solenoid.
Machine not plugged in. Plug in power connector.
A fuse is blown. Change the fuse.
Open wiring. Check for proper connection.
11 Improper
equipment
operation.
Air leakage. Replace parts as necessary
(gaskets, seals, and hoses). (See
Recommended Spare Parts List on
page ii)
Malfunction of filter
element.
Clean or replace the filter element.
Condensation accumulation
in air filter.
Remove condensation from air filter.
12 Labels double
feed.
Missing labels on roll. Inspect roll and contact Accraply if
necessary (see Customer Service on
page i).
Label sensor out of
adjustment.
Adjust label sensor light.