Baroness LM56GC, Owner'S Operating Manual

Page: 78 / 88

Insert an item such as a wooden hammer
handle into the reel cutter to prevent it from
turning, and install the disk spring and the
lapping bolt.
5
1
2
3
4
xg9isz-005
Installing The Small Cover (Left)_002
1 Reel cutter
2 Lapping bolt
3 Disk spring
4 Gear retainer collar
5 Wooden hammer
Adjustment of Brake
Caution
If the brake wire is cut, the machine will be
unable to stop.
If the brake wire is cracked or damaged,
replace it with a new one immediately.
Caution
If the brake is not sufficiently effective when it
has been applied, adjust the brake wire.
Adjust the brake by use of the brake wire
adjusting nut.
1
nfzln9-008
Adjustment of Brake_001
1 Adjusting nut
4.
1.
Make sure that the brake shoe does not
touch the brake drum.
Avoid the brake always being engaged.
Note:
The brake shoe may touch the brake drum if
you hear a rubbing sound or the drum feels
heavy when rotating the drum.
Make sure that the brake lever is locked
when gripping the lock lever while gripping
the brake lever.
Adjustment of Engine Clutch Section
For centering adjustment of the engine clutch :
Centering adjustment of the engine clutch is
required after replacement of the engine or
clutch parts.
Adjust the engine clutch.
Adjust the clutch wire.
Adjust the clutch spring.
For clearance adjustment of the engine clutch :
Clearance adjustment of the engine clutch is
required after replacement of the clutch wire or
when the clutch slips.
Adjust the clutch wire.
Adjust the clutch spring.
Adjustment of Engine Clutch
Adjust the clearance between the engine
clutch and clutch facing so that it will be 0.5
- 1.0 mm (0.020 - 0.039 in) when the main
clutch lever set to the "ON" position.
1 2
A
wdzf6u-001
Adjustment of Engine Clutch_001
1 Engine clutch
2 Clutch facing
A 0.5 - 1.0 mm (0.020 - 0.039 in)
Loosen the four bolts A securing the
engine.
Be sure not to loosen the bolts B.
2.
3.
1.
2.
3.
1.
2.
1.
LM56GC
・
LM66GC / LM66TC
Maintenance
Page 5-22
Maintenance Work